Item#: 112360
SKU#: DC11

Blade and Bit Cutting Lubricant

Fluoropolymer Technology,Safe for the Environment


This product is prohibited from shipment to and or use in California

Cut wood and laminates clean and easy without ragged edges and with considerably less friction
Prevent blade fouling from resin and pitch build-up
Prolong life of carbide and stellate-tipped blades by up to 3 times
Contains no silicone or petroleum oil, will not stain wood or interfere with glues or finishes.
Prolongs equipment life by reducing saw or drill motor drag by up to 25%.


Directions:

To Reduce Friction and Pitch Buildup:
Clean blade or bit with a degreasing agent (lacquer thinner).
Spray a thin, even coat over the entire blade or bit, including the gullets and especially the cutting edge. Allow a few seconds to dry.

For Best Results:
After several cuts, re-spray entire blade or bit. Reapply daily or more frequently based on workload and material being cut.

 

This product is ORMD. The FAA prohibits air shipments of these products